viper 791 1992 ford explorer not starting

Home / the12volt's Install Bay / Car Security and Convenience / viper 791 1992 ford explorer not starting (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

slinky85

Member - Posts: 25

Joined: January 22, 2007

Location: United States

Posted: March 11, 2007 at 4:07 PM / IP Logged

Ok, I got the locks to work fine with the 2 relays. The starter is still playing mind games. I programmed the tach wire. nothing. Shutdown diagnostics showed no rpm/tach signal, probably because the starter never turned. From the satellite relay harness if i jump red to pink ignition turns on, then jump red+ping to purple i can hotwire the car. This eliminates ignition wiring problems i hope.

Next, I programmed the brain for no voltage/no tach, just timed. It is on default timed operation, the purple wire shows 12v for a short period of time, but no starter crank.

Any ideas?

Any questions?

thanks

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 791 1992 ford explorer not starting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.