2nd ign wire 2001 chevy truck

Home / the12volt's Install Bay / Car Security and Convenience / 2nd ign wire 2001 chevy truck (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

garedora

Member - Posts: 7

Joined: March 08, 2007

Location: United States

Posted: March 09, 2007 at 3:45 PM / IP Logged

On the 2nd ign wire do you splice the 2nd ign alarm wire into this wire or do you cut the ign wire and connect the + side to the alarm 2nd ign wire.

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: March 09, 2007 at 4:46 PM / IP Logged

Just connect them, no need to cut it. strip it and solder it.

Back to Top

garedora

Member - Posts: 7

Joined: March 08, 2007

Location: United States

Posted: March 09, 2007 at 7:14 PM / IP Logged

I have hooked up the 2nd ign wire and still have the same transmission issue. Any other ideas ?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 09, 2007 at 8:07 PM / IP Logged

What remote starter are you using ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

garedora

Member - Posts: 7

Joined: March 08, 2007

Location: United States

Posted: March 09, 2007 at 11:27 PM / IP Logged

this is the link. Sr6000.

http://www.clarion.com/ca/en/products/2006/ungo_security/remote_engine_start/SR6000/ca-en-product-pf_1138706935808.html

Back to Top

speed of sound

Member - Posts: 19

Joined: February 18, 2007

Location: Connecticut, United States

Posted: March 16, 2007 at 5:05 PM / IP Logged

meter the output during remote start and make sure voltage does NOT drop while cranking. If it does use a relay to power up circuit

Speed of Sound Technologies

230 pershing Dr

Ansonia, CT 06401

203-954-0066

Back to Top

Search for other posts by speed of sound

iskidoo

Silver - Posts: 1,040

Joined: December 08, 2002

Location: Maine, United States

Posted: March 18, 2007 at 3:36 PM / IP Logged

Did you already drive it with the transmission booted improperly? You may have damaged it. Hooking the wire up now won't undamage it. Hopefully the transmission didn't go on you.

Steve G

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2nd ign wire 2001 chevy truck

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.