the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1999 a4 w/bose wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
frydchkn 
Copper - Posts: 60
Copper spacespace
Joined: March 11, 2006
Location: United States
Posted: March 10, 2007 at 1:09 PM / IP Logged  

Greetings,

I am replacing the HU and adding an amp for a box. 

- Does anybody know the pinout for the factory HU harness? 

- Is there an integration plug available?

- Where is the factory amp(s) located?

- Any surprises I might run into, i.e. RDS type radio, OnStar, or sum kind of Audi DooHickey?

All help would be appreaciated, Thanks

master5 
Silver - Posts: 1,123
Silver spacespace
Joined: October 10, 2006
Location: United States
Posted: March 10, 2007 at 2:13 PM / IP Logged  

That vehicle should work fine with a standard VW harness metra part # 70-1784.

The factory amp should be in the trunk behind the driver side panel but I am not 100% sure. However..you can go high level into it (integrate)so that is an option if you want to save time and labor

No doohickys to worry about.  If the deck has RDS that is just a feature for radio statio ID on the head unit screen ..will not effect anything.

I don't think anyone but GM uses onstar...well at least not in 1999...is there an onstar button in the dash of that car????  If not don't worry about it..if so get back and I'll make some calls.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, October 25, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer