pioneer n2 navigation

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / pioneer n2 navigation (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dman007

Copper - Posts: 106

Joined: November 24, 2002

Location: Florida, United States

Posted: March 21, 2007 at 1:46 PM / IP Logged

I recently installed a used N2, and ran into a problem with the navigation dvd. The HU didn't come with dvd's so I bought a new CNDV-40MT(Orange) East Disc. After I insert disc it checks disc, then I get an error message "Please Insert Appropriate Disc"

I know the 40MT is Brand new and original. But what could be causing this error? Has the previous owner updated to a new disc/OS? CNDV-50(Green)?

I am guessing these discs aren't downward compatible so to be safe should I go and buy an CNDV-60(Purple?) The msot recent disc available?

custom audio ny

Copper - Posts: 176

Joined: March 11, 2007

Location: United States

Posted: March 21, 2007 at 4:32 PM / IP Logged

Your best bet would be to contact Pioneer customer service @ 1-800-457-2881. Only they can tell you 100% for sure if those CD's are compatible. They may need date codes or serial numbers etc. if there was a change during the model run..and with Pioneer that is quite possible.

I don't know where you got the cd from but I think the cndv40mt might be older as they are no longer available from Pioneer. The cndv-50mtp which retails for 250 dollars is still available but again you need to call customer service for compatiblilty.

The cndv-60mp (purple) is an upgrade (retails for $250 as well) but again Pioneer can best answer if that will work with your unit or perhaps something else is wrong, hopefully not a defect.

Hope this info helped.

Custom Audio

Lynbrook NY

ASE/MECP master certified

custom audio ny

Copper - Posts: 176

Joined: March 11, 2007

Location: United States

Posted: March 21, 2007 at 4:37 PM / IP Logged

One other thing I should mention. I have seen this happen before and it turned out that the CD needed to be cleaned. I know you state it is brand new but perhaps it got dirt or a grease smudge on it..well can't hurt to check. Basically I am concerned that perhaps the lazer is not reading it which would cause your issue as well.

Custom Audio

Lynbrook NY

ASE/MECP master certified

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pioneer n2 navigation

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.