need confirmation, 1700g, 2006 tahoe

Home / the12volt's Install Bay / Car Security and Convenience / need confirmation, 1700g, 2006 tahoe (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: March 30, 2007 at 11:07 PM / IP Logged

I need to confirm wether or not keysense needs to be connected for this vehicle. I have been out of the R/S game for a couple years and just want to check. Any other input would be helpful. TIA.

Also the +domelight circuit input.

Thanks all.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: March 31, 2007 at 12:22 AM / IP Logged

I am only going to assume that the 1700G is simular to the GM SL2. I am NOT a DEI type guy. (Even though they bought Astro) Not sure. But at any rate, the keysence is not used on THIS module.

For domelight supervision, use the blue/white NEG. behind the headlight switch.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 01, 2007 at 12:31 AM / IP Logged

Thanks, anyone else on the + domelight input on the module?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 02, 2007 at 6:26 PM / IP Logged

Also has anyone had any problems with the module not putting out the signal for the door triggers?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: April 02, 2007 at 8:45 PM / IP Logged

You connect the + domelight wire to the gray/black on the BCM directly under the steering column. It's in the black plug, pin E. Connect this and your door trigger output will work....

Mike M2

Tech Manager

CS Dealer Services

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: April 02, 2007 at 9:57 PM / IP Logged

Mike M2...isn't that gray/black @ the bcm (NEG)- ? Teach me...would ya please. How do you take a negative output, and connect it to a + input?

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: April 03, 2007 at 6:34 AM / IP Logged

KarTuneMan wrote:

Mike M2...isn't that gray/black @ the bcm (NEG)- ? Teach me...would ya please. How do you take a negative output, and connect it to a + input?

It is a positive, not negative. All the dome lights in all the 2003-up GM trucks are positive dome light trigger. .

Mike M2

Tech Manager

CS Dealer Services

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: April 03, 2007 at 8:36 AM / IP Logged

Thank you sir......

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 03, 2007 at 11:01 AM / IP Logged

Mike M2 wrote:

You connect the + domelight wire to the gray/black on the BCM directly under the steering column. It's in the black plug, pin E. Connect this and your door trigger output will work....

I did make that connection and the door trigger output worked at first. After the install was completed and the car put together it stopped working. Don't know what happened.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

johnmax

Copper - Posts: 131

Joined: November 15, 2003

Posted: April 03, 2007 at 12:09 PM / IP Logged

I think as in with the 457G you have to reset with ignition for it to monitor the door again after a while?

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.