turn off pop w/ Onstar interface

Home / the12volt's Install Bay / Car Audio / turn off pop w/ Onstar interface (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

mrdonedeal

Member - Posts: 4

Joined: February 08, 2003

Location: United States

Posted: February 08, 2003 at 11:59 PM / IP Logged

I used a Soundgate STARMOD DV2 to interface with the onstar system in a 02 Tahoe. An external speaker was used for playback. The problem is that about 20 seconds after the ignition is turned off, there is a pop that comes through the external speaker. Has anyone ran into this problem or know how to remedy it?

Thanks in advance.

Mr. Donedeal

slobert

Member - Posts: 31

Joined: January 27, 2003

Location: United States

Posted: February 09, 2003 at 11:39 AM / IP Logged

i've heard of people putting a resistor on the amp turn on, don't know if it was for the onstar speaker though

mrdonedeal

Member - Posts: 4

Joined: February 08, 2003

Location: United States

Posted: February 10, 2003 at 12:26 AM / IP Logged

Thanks for the reply, slobert, it's worth a shot.

Mr. Donedeal

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

turn off pop w/ Onstar interface

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.