the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

powerstroke diesel, crimestopper?


Post ReplyPost New Topic
< Prev Topic Next Topic >
greendually 
Member - Posts: 11
Member spacespace
Joined: August 26, 2006
Posted: April 16, 2007 at 5:16 AM / IP Logged  
I installed a crimestopper alarm/starter in my truck.When i start the truck with the remote sometimes the truck will not start and the alarm will sound.But if i turn off the alarm the truck will start.It almost seems like the shock sensor is turning back on and stopping the starting process after it has started turning the starter over.
Hymer 
Silver - Posts: 695
Silver spacespace
Joined: November 20, 2004
Location: United States
Posted: April 16, 2007 at 8:21 AM / IP Logged  
disable the shock sensor, and arm it then start it for a few days, that should tell ya if its the shock sensor. If it is, then set the sensitivity down, and or remount it somewhere else..
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
greendually 
Member - Posts: 11
Member spacespace
Joined: August 26, 2006
Posted: April 17, 2007 at 3:00 PM / IP Logged  
Well i turned the shock sensor all the way down,still did the same thing.Anyone have any ideas that i could check.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: April 17, 2007 at 3:21 PM / IP Logged  

How did you wire the "wait to start"

Where did you connect at?

What year is your truck?

greendually 
Member - Posts: 11
Member spacespace
Joined: August 26, 2006
Posted: April 17, 2007 at 4:23 PM / IP Logged  
I didnt wire in the wait to start,i used a 20 sec delay.
All the connections are under the steering colum,what colors,i dont remember off hand.
My truck is a 2003 f350 7.3 diesel.
Thanks for your help.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: April 17, 2007 at 5:51 PM / IP Logged  
When the alarm is triggered....what zone does the LED tell you was set off? Does it say "shock sensor" (the # of flashes)
greendually 
Member - Posts: 11
Member spacespace
Joined: August 26, 2006
Posted: May 08, 2007 at 5:27 PM / IP Logged  
KarTuneMan wrote:
When the alarm is triggered....what zone does the LED tell you was set off? Does it say "shock sensor" (the # of flashes)
when the alarm goes off,it says the doors got opened.Could it be the door trigger?
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: May 08, 2007 at 6:55 PM / IP Logged  
Could be the bcm wake up, or yes, the door pin! How did you catch the door pins? where? Did you isolate the pins?
greendually 
Member - Posts: 11
Member spacespace
Joined: August 26, 2006
Posted: May 09, 2007 at 3:51 AM / IP Logged  
I used the door dome light trigger.
greendually 
Member - Posts: 11
Member spacespace
Joined: August 26, 2006
Posted: May 10, 2007 at 3:17 PM / IP Logged  
I did install diodes (i think thats what there called) to the trigger wire from the dome light wire.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, February 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer