remote start, 97 toyota avalon

Home / the12volt's Install Bay / Car Security and Convenience / remote start, 97 toyota avalon (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

zirconx

Member - Posts: 47

Joined: March 31, 2007

Posted: April 17, 2007 at 10:31 PM / IP Logged

To be more clear, there is no status or after start wire on my remote starter. Wish you could edit your posts here.

I took lots of pictures as I was doing it, I am writing up a little howTo for the AvalonFAQ.com website.

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: April 18, 2007 at 9:34 AM / IP Logged

Did you use diodes to seperate the wires? Locks , and factory alrm disarm? By the way great pic. remote start, 97 toyota avalon - Page 3 - Last Post -- posted image.

P.S. and yes you can edit post here, but you are new member (rookie)

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

zirconx

Member - Posts: 47

Joined: March 31, 2007

Posted: April 18, 2007 at 9:40 AM / IP Logged

No I didn't use a diode, but I think I get it now.

Place a diode between the door lock side of the wire and the car side of the wire. Hook up the RS disarm wire into the car side. That way the car 'sees' the disarm pulse, but the lock doesn't?

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: April 18, 2007 at 10:25 AM / IP Logged

remote start, 97 toyota avalon - Page 3 - Last Post -- posted image. I think u got it let us know what happens

Also what is your Loacation?

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

zirconx

Member - Posts: 47

Joined: March 31, 2007

Posted: April 18, 2007 at 10:28 AM / IP Logged

I'm near Omaha nebraska.

I have someone interested in the car, if they buy it tonight I'm just going to leave it as-is, but if not then I'll probably put in a diode later this week or next week.

Thanks!

johnmax

Copper - Posts: 131

Joined: November 15, 2003

Posted: April 18, 2007 at 4:05 PM / IP Logged

I have the same car. Use the neg keysense wire at they cylinder to do disarm without unlocking the doors. Can't remember the color.

zirconx

Member - Posts: 47

Joined: March 31, 2007

Posted: April 18, 2007 at 4:37 PM / IP Logged

johnmax wrote:

I have the same car. Use the neg keysense wire at they cylinder to do disarm without unlocking the doors. Can't remember the color.

I'm surprised that would work, since I triggered the alarm the other night when trying to start the car. I was testing the alarm arming, etc., so I locked the doors and shut the door, while I was still inside. After the alarm light started blinking, I inserted the key and tried to start the car - the alarm went off.

I don't remember if it went off when I put the key in or when I tried to start the car.

Hmmm but that may have to do with the fact that I disabled the keybuzzer by unhooking a two-wire plug up by the keyswitch? That thing was driving me nuts!

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: April 18, 2007 at 5:13 PM / IP Logged

"Hmmm but that may have to do with the fact that I disabled the keybuzzer by unhooking a two-wire plug up by the keyswitch? That thing was driving me nuts!"

Yes that is why. As I stated on one of the earlier post that what I do on this cars. Keysense wire.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: April 18, 2007 at 5:49 PM / IP Logged

zirconx wrote:

So why do you think the doors won't unlock with the remote after the alarm has armed? The car must be disabling the inside electric locks, yes?

The car has the child safety lock feature. You need to hook the lt.green black (-) lever wire up as well as the yellow/red unlock wire. Use diodes off of your unlock wire of the remote start.The other way to get around it is to just use the blue(-) disarm wire by itself. This wire will only unlock the drivers door on the first pulse, and will unlock the rest on the second pulse. This wire is only gonna test by turning the key in the door lock cylinder (will not test at the lock switch on the inside.)

zirconx

Member - Posts: 47

Joined: March 31, 2007

Posted: April 18, 2007 at 8:27 PM / IP Logged

I did figure out that the blue wire only shows a pulse when the key is turned. But sending a second pulse to this wire does not unlock the rest of the doors, BTW.

I'm not 100% sure I have the child safety lock feature. If it just means disabling the inside lock buttons after the alarm arms, then I probably have it.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote start, 97 toyota avalon

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.