down firing subs and clearance

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / down firing subs and clearance (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

isa-kuruption

Member - Posts: 18

Joined: April 04, 2007

Posted: April 17, 2007 at 9:05 AM / IP Logged

I have heard about clearance requirements (to the side) when doing down firing subwoofers. The equation was, I believe, cone area * (# of subs) / 2. Could anyone confirm this? Also, is this just a general rule of thumb, and if so, could I get away with a number 10-20% smaller?

Thanks.

Back to Top

bellsracer

Silver - Posts: 703

Joined: January 14, 2006

Location: United States

Posted: April 18, 2007 at 6:49 AM / IP Logged

I"m curious, what do you mean "to the side"? Clearance away from a wall (or whatever) or clearance from say the floor to the sub?

Never send your ducks to eagle school.

The difference between ordinary and extraordinary is that little extra.

The 3Ls of life: Learn from the Past, Live for the Present, Look to the Future.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

down firing subs and clearance

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.