2000 Toyota Sienna Door Lock Issue

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Toyota Sienna Door Lock Issue (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: April 25, 2007 at 2:24 PM / IP Logged

The factory alarm should disarm as soon as you unlock the doors. it uses the same unlock wire which is blue / YELLOW. Try disconnecting the lock(green wire) and connect your red lead from the multimeter to 12v and the black to the green wire. lock the door with the remote. if it stays on 12v it may be a def r/s.

Back to Top

mlaurenza

Member - Posts: 33

Joined: December 21, 2006

Location: United States

Posted: April 25, 2007 at 2:29 PM / IP Logged

I already did a similar test. The factory alarm will not disarm with the remote start or using the key in the door. The r/s is fine. There is no current coming from the r/s. The lock wire in the van shows ground even when nothing is connected to it.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Toyota Sienna Door Lock Issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.