the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 Chevy Silverado Radio Wiring Diagram


Post ReplyPost New Topic
< Prev Topic Next Topic >
wormwarrior25 
Member - Posts: 2
Member spacespace
Joined: May 16, 2007
Location: United States
Posted: May 16, 2007 at 7:06 PM / IP Logged  

hi im just looking for the wires needed to install an aftermarket radio. i have the new body 2007 silverado. i dont care if the onstar or door chimes work. i would like to just hook up my radio. any help would be greatly apprieciated. thanks

wire4veins 
Copper - Posts: 97
Copper spacespace
Joined: November 25, 2002
Location: United States
Posted: May 17, 2007 at 10:46 PM / IP Logged  
Here is the info in your vehicle:
Radio 12v      RED / white       +       radio harness
Radio Ground      black       -       radio harness
Radio Ignition      (GMLAN Serial Data)            
Radio Illumination      yellow (dimmer)       +       radio harness
Factory Amp Turn-on      same as power antenna wire            
Power Antenna      white       +       radio harness
LF Speaker +/-      tan - gray       +,-      radio harness or amplifier
Notes: If equipped, the amplifier is under the rear of the center console.
At the amplifier, the left subwoofer wires are dk. blue/white (+) - lt. GREEN/ black (-). The right subwoofer wires are dk. green (+) - lt. blue/black (-).
RF Speaker +/-      lt. green - dk. green       +,-      radio harness or amplifier
LR Speaker +/-      brown - yellow       +,-      radio harness or amplifier
RR Speaker +/-      dk. blue - lt. blue       +,-      radio harness or amplifier
This information is a reference only. Always verify all circuits by using a DVM.
wire4veins
"D"
Precision Autosound - Owner
MECP Master Installer
wormwarrior25 
Member - Posts: 2
Member spacespace
Joined: May 16, 2007
Location: United States
Posted: May 18, 2007 at 3:54 PM / IP Logged  
thanks for the quick reply
uprvrndn 
Member - Posts: 1
Member spacespace
Joined: June 17, 2007
Location: United States
Posted: June 17, 2007 at 12:00 PM / IP Logged  
I do not have a white wire on any of the factory harnesses for the power antenna/amp power on. is there a pin number associated with it

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, December 8, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer