bmw 540i fiberglass trunk

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / bmw 540i fiberglass trunk (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

fran82

Member - Posts: 1

Joined: January 06, 2007

Location: United States

Posted: June 20, 2007 at 9:33 PM / IP Logged

blubalz wrote:

.

bmw 540i fiberglass trunk - Page 2 -- posted image.

Please don't leave that like it is. Not Safe. That backstrap is not even close to being able to carry the same current as a proper sized piece of wire. Also, a layer or 2 of electrical tape isn't enough protection from possible abrasion. Just look at how thick the jacket is on a piece of 4 gauge wire. Besides, electrical tape will eventually fail and leave exposed metal carrying enough current to weld itself or start a fire.

I wouldn't want to be responsible for burning a BMW 540 to the ground.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bmw 540i fiberglass trunk

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.