dei python 990 sst

Home / the12volt's Install Bay / Car Security and Convenience / dei python 990 sst (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ciaksaiong

Member - Posts: 9

Joined: June 03, 2007

Location: Malaysia

Posted: June 06, 2007 at 3:14 AM / IP Logged

I have just installed dei python 990sst in my car.. the problem is ...

my transmitter doesnt notify me when the alarm is triggering even when i am just beside the car.. but when i disarm it does let me know the alarm was triggered.. n i do get confirmation when i arm n disarm its just that the alarm doesnt automatically send out notifications when the alarm is triggered .. wat would be the most likely cause of this problem?

Hope u guys can help me.. thanx a million

dei python 990 sst - Last Post -- posted image.

captainzab

Silver - Posts: 606

This member has made a donation to the12volt.com. Click here for more info.

Joined: February 09, 2005

Location: United States

Posted: June 06, 2007 at 12:30 PM / IP Logged

Customer had a problem like this, i swapped out the remote. (LCD version from DEI, but non SST)

Should be the same reason.

Note: You Always Dont Get What You Pay For.

altytruck

Member - Posts: 24

Joined: February 03, 2006

Location: United States

Posted: June 06, 2007 at 2:23 PM / IP Logged

sounds the remote is sleeping. easy way to tell is to wait 10-15 seconds on a sst remote and you will see a rx flash at the top of the lcd above the lock/unlock icon. If not its sleeping. Easy to fix. Flip over remote press and hold program buttom until you hear one long beep. within 5 seconds press the (*) button and it should turn it on. To exit wait 5 seconds should here two short beeps. Now look at remote and within 10-15 seconds it should show the rx button which lets you know its awake. arm system set it off and it should give confirmation

ciaksaiong

Member - Posts: 9

Joined: June 03, 2007

Location: Malaysia

Posted: June 06, 2007 at 7:43 PM / IP Logged

thanks guys .. will try it later n let u guys know hope it works

ciaksaiong

Member - Posts: 9

Joined: June 03, 2007

Location: Malaysia

Posted: June 07, 2007 at 12:49 PM / IP Logged

u r right it was in sleep mode.. it working well now.. thanx every1 for your help.. my bad

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dei python 990 sst

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.