Designtech first defense programming.

Home / the12volt's Install Bay / Car Security and Convenience / Designtech first defense programming. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wlg83

Copper - Posts: 60

Joined: June 20, 2002

Location: United States

Posted: February 13, 2003 at 4:31 PM / IP Logged

Product #29646.... how is it that I program a new remote to the system? I know it involves the white momentary push-button, but cannot remember the rest. Thanks in advance for any help.

Derek

Copper - Posts: 83

Joined: April 12, 2002

Location: United States

Posted: February 13, 2003 at 5:25 PM / IP Logged

wig83,

1. Have at least one door open.

2.Disconnect power by removing the 16 pin harness from the module for 5 seconds and then reconnect it.

3.Within 5 seconds, quickly push and release the White button on the side of the module. The LED will flash 2 times to tell you that the system is now in the learning mode.

4. Within 5 sec. hold down the lock/unlock button (#1) until the LED flashes 1X , indicating that it has learned the Xmtr. code. Do this again with each Xmtr. within 5 sec.

5. When done with all transmitters, wait until the LED flashes 5X indicating the system has exited the learning mode.

6.Close the door. Then try the transmitter(s)

wlg83

Copper - Posts: 60

Joined: June 20, 2002

Location: United States

Posted: February 14, 2003 at 2:36 PM / IP Logged

Thanks Derek. After I posted, I remembered not to hold the white button, but rather to tap it. Everything is working great.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Designtech first defense programming.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.