actuated lisence plate

Home / the12volt's Install Bay / Relays / actuated lisence plate (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

dualsport

Silver - Posts: 983

Joined: September 27, 2005

Location: United States

Posted: June 21, 2007 at 11:35 PM / IP Logged

actuated lisence plate - Page 2 -- posted image.

Back to Top

hotwaterwizard

Silver - Posts: 1,350

Joined: December 11, 2003

Location: California, United States

Posted: June 21, 2007 at 11:36 PM / IP Logged

Okay lets spell it out.

85 and 85 from both relays go to the key switch.

86 and 86 of both relays go to ground

87a of relay 1 and 87 of relay 2 go to ground too.

87 of relay 1 and 87a of relay 2 go to +12v

The actuator wires go on 30 of relay 1 and 30 of relay 2.

If it does the opposite of what you want just switch the actuator wires around,

John DeRosa (Hotwaterwizard)

Stockton California

When in doubt, try it out !

Back to Top

Search for other posts by hotwaterwizard

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

actuated lisence plate

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.