the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

bridging 2 amps together


Post ReplyPost New Topic
< Prev Topic Next Topic >
chris89127 
Member - Posts: 3
Member spacespace
Joined: June 25, 2007
Location: United States
Posted: June 26, 2007 at 12:12 PM / IP Logged  
i have 2 pyle driver plad3300d mono block they have a bridged mode but it says put 1 amp on master then 1 on slave then on the speaker terminals the neg wires to the other neg on amp so the 2 amps neg are together then both positive hooks up to sub is that right?
slab42 
Copper - Posts: 56
Copper spacespace
Joined: March 18, 2003
Location: United States
Posted: June 26, 2007 at 2:44 PM / IP Logged  

It seems you already read the manual... hook  it up like it tells you to...

still_walkin 
Silver - Posts: 644
Silver spacespace
Joined: April 18, 2007
Location: California, United States
Posted: June 28, 2007 at 12:30 AM / IP Logged  
yeah it should work ok i agree
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"
wajih 
Member - Posts: 1
Member spacespace
Joined: June 29, 2007
Location: Australia
Posted: June 29, 2007 at 6:52 AM / IP Logged  
yeah you gotta have a negative wire going to two (-ve)terminals of both amps. Some people like to refer it to as a "Common ground".
But 2 amps dude. Crank tha doodie!!!bridging 2 amps together -- posted image.
Ws

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer