the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

door trigger, 2001 dodge ram


Post ReplyPost New Topic
< Prev Topic Next Topic >
jurb 
Member - Posts: 39
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 23, 2007
Location: United States
Posted: June 27, 2007 at 7:37 AM / IP Logged  
Finished my installation and everything was cool for a couple weeks. I went back to rerun my wires and organize them a bit better, and now all of a sudden my door trigger is being tripped. Obviously I am not riding around with my doors open but somehow that wire must be seeing ground. I think it must be: A) the wire from one of my triggers might be damaged and touching metal, B) the diode from the door is failing (is that possible?0 are there other possibilities that I could be missing? Thanks for the help in advance.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 27, 2007 at 9:44 AM / IP Logged  

Worked fine for a couple weeks? Then started triggering .....with your truck rolling down the raod?

What did you use for door trigger? And why would it trigger while driving, it shouldn't be "armed" There are 2 possible places to get door trigger. At the keyless

module, OR at an under dash light.

What did you install ? (what type of unit)

jurb 
Member - Posts: 39
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 23, 2007
Location: United States
Posted: June 27, 2007 at 11:48 AM / IP Logged  
I should have been more specific, I installed a Viper 350HV, and when I say door trigger being tripped what I mean to say is that my dome light stays on as if my door is open. When I arm the alarm it makes 2 deeps as if the door is open. What do you think?
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 27, 2007 at 3:01 PM / IP Logged  

Dome light delay maybe... ? If the dome light takes a bit of time to turn off...the alarm will think the door is open.

I believe the unit should be able to be programed to ignore the dome upon arming? Someone else will chime in on this I'm sure.

enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: June 27, 2007 at 5:44 PM / IP Logged  

that is correct Kartuneman.  This is a feature on the alarm.  Its called "door sensor bypass chirp". Look up the manual and turn off the feature

jurb 
Member - Posts: 39
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 23, 2007
Location: United States
Posted: June 27, 2007 at 6:52 PM / IP Logged  
Thanks for the responses guys, but I didn't hook up the dome supervision output for the alarm so unless I am missing something it can't be the dome light relay. I am going to test the wires here shortly and see what I can find
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 27, 2007 at 7:46 PM / IP Logged  
It has nothing to do with domelight supervision,  domelight supervision simply turns the domelight ONwhen you disarm/unlock. Just read about programing the dome delay OUT!
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: June 27, 2007 at 7:53 PM / IP Logged  

If you used the yellow wire as a door trigger it will give you a chirp.  Only way to stop this is to go an get individual door triggers or turn off door sensor bypass.

jurb 
Member - Posts: 39
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: May 23, 2007
Location: United States
Posted: June 28, 2007 at 1:43 PM / IP Logged  

again thanks, it turns out my passenger door pin switch got stuck.  what is the dome delay?  thats not standard in all cars is it?

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: June 28, 2007 at 4:09 PM / IP Logged  

Dome delay is.... after you close the door, it takes up to 30 seconds for the dome light to shut off/down. Some alarms, when you lock and arm, see the dome being on, means the door is open, means someone is breaking in, means it's time to sound the alarm.......door trigger, 2001 dodge ram - Last Post -- posted image.

Glad to hear you got er done!


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 5, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer