the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

python 1400xp reset


Post ReplyPost New Topic
< Prev Topic Next Topic >
PBLouie 
Member - Posts: 1
Member spacespace
Joined: February 02, 2005
Posted: June 30, 2007 at 7:55 PM / IP Logged  

I have a Python 1400XP in an 05 Dodge 2500 Diesel, anyway I took it to have some warranty work done.  When I got it back the transmitters would not work.  I got into it and run a diagnostics test and it said the (+/-) Shutdown fault had occured.  I believe the unit just needs to be reset but my book isn't very explicit about how to do it.  Any help would be appreciated thanks. 

swamprat323 
Gold - Posts: 1,333
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: July 01, 2007 at 1:15 PM / IP Logged  
look in the down load section on this site the install guide is there it tell ya how to program the remotes.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, December 6, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer