2008 ford f250, alarm, keyless entry

Hi I have to put a keyless entry on a friends truck 08 Ford F250 anybody know the wire colors and locations...

12volts  blue/red (x2)(common 20A)   +   ignition harness     Starter  blue/white   +   ignition harness     Second Starter  N/A           Ignition  WHITE/ orange   +   ignition harness     Second Ignition  N/A           Third Ignition  N/A           Accessory  BROWN / yellow   +   ignition harness     Second Accessory  PURPLE / green   +   ignition harness     Keysense  blue/lt. gray   +   ignition harness     Power Lock  blue/lt. green   -   driver kick, door harness     Power Unlock  yellow/purple   -   driver kick, door harness     Lock Motor             Unlock Motor  PURPLE / gray   5wi  driver kick, door harness     Parking Lights+  PURPLE / white   +   SJB, conn. D, pin 20    Parking Lights-  gray   -   headlight switch    Hazards             Turn Signal(L)             Turn Signal(R)             Reverse Light  GREEN/ brown   +   harness to rear     Door Trigger  see notes   -   each kick or SJB, conn. C    Dome Supervision  yellow/gray   +   SJB, conn. A    Trunk/Hatch Pin             Hood Pin             Trunk/Hatch Release             Power Sliding Door             Factory Alarm Arm             Factory Alarm Disarm             Disarm No Unlock             Tachometer  blue/white   ac   PCM or Customer Access Point   Wait to start  see DirectFax document 1091           Brake Wire  PURPLE / white   +   brake pedal switch     Parking Brake  WHITE/ purple   -   switch or SJB, conn. C, pin 1    Horn Trigger  yellow/red   -   horn switch     Memory Seat 1  PURPLE / white   -   driver kick, door harness     Memory Seat 2  yellow   -   driver kick, door harness     Memory Seat 3     -