panavise or pro fit mount

Home / the12volt's Install Bay / Cellular and Communications / panavise or pro fit mount (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: August 12, 2007 at 8:05 AM / IP Logged

I have a 2007 Mercury Milan that i'm going to be installing a handsfree system for.I looked at both types of mounts,but the Pro-Fit mount instructions say that i'm going to need to trim my radio panel for it to fit,when the Panavise mount states no such thing.Which mount is a better product?

"ole blake"

Back to Top

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: August 16, 2007 at 7:17 PM / IP Logged

What kind of HFK are you installing, basically both companies make the same kind of mounts. If I were you I would get the panavise. We carry both but dont really encounter an issue like that. Only down side about these mounting brackets is that the wire needs to go somewhere and you wouldn't want it loose so common sense would tell you to route it inside but then again it make the panel wider. If you need help on installing it do not hesitate to ask since these kits are one of my many trade skills.

Back to Top

mastermarine

Member - Posts: 14

Joined: January 03, 2006

Location: United States

Posted: August 17, 2007 at 5:47 PM / IP Logged

The only real benefit to the Profit is the instructions usually have better pictures. You can search for the instructions for either brand on their web sties.

Otherwise they are very similar normally. I am not familiar with the kits for your specific vehicle. Sometimes they are not in exactly the same locations. Look on their web sites at the directions to help you decide which to get. I try to stay away from the new Profits with the universal joint since they always seem to loosen up.

Later,

MasterMarine

Back to Top

CapSS92

Copper - Posts: 51

Joined: August 25, 2003

Location: United States

Posted: September 24, 2007 at 5:28 AM / IP Logged

I gotta say the Panavise works better for me.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You can vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

panavise or pro fit mount

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.