jl 10 w3 hooked up to jl 250/1

Home / the12volt's Install Bay / Car Audio / jl 10 w3 hooked up to jl 250/1 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jake_evans420

Member - Posts: 1

Joined: August 22, 2007

Location: United States

Posted: August 22, 2007 at 8:18 AM / IP Logged

i have them all hooked up and i cant figure out whats wrong its just not working and the amp is getting power idk i hope one of you guys can help me out if you need any more info just let me know

Back to Top

StealthEs

Copper - Posts: 326

Joined: September 04, 2003

Location: New Jersey, United States

Posted: August 22, 2007 at 9:28 AM / IP Logged

I would start by checking the RCA make sure they are connected at the radio properly. You might have a bad set of rca's. Run a new set as a test, see if that helps any. If those dont help, get a small speaker you might have around. Use that as a test speaker. Unhook the sub from the amp and use you test speaker to see if that gets power.

Cris

Back to Top

dpaton

Copper - Posts: 141

Joined: July 19, 2004

Location: United States

Posted: August 22, 2007 at 12:36 PM / IP Logged

Check the remote lead too. I spent an entire weekend troubleshooting something similar for a friend that turned out to be a broken blue wire under the carpet. Annoying, but easy to fix.

This is not a sig. This is a duck. Quack.

Back to Top

jvillefinest

Copper - Posts: 255

Joined: December 29, 2003

Location: Florida, United States

Posted: August 22, 2007 at 3:02 PM / IP Logged

take a battery...usually a drill battery and touch it to the possitive and negative wires comming from the sub to the amp...try it one way then switch the wires touching the battery to the other side...if it moves in and out you can completely take that out of the problem side of the list.

2007 Acura TSX

SQ setup in the works

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

jl 10 w3 hooked up to jl 250/1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.