mcculloch hid’s, 04 dodge ram

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / mcculloch hid’s, 04 dodge ram (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

shadowflare99

Member - Posts: 3

Joined: February 04, 2008

Location: Quebec, Canada

Posted: February 04, 2008 at 10:22 PM / IP Logged

Well your problem it's resistance ..

I pluged my HID 50 WAtts on my aveo ... well the original Low-beam (55-100 watts ) was not enought good for the hid ... but the High beam ( 100 watts ) was ok (harness light )

well my solution was using the relays direct from the battery ( using 30 .. ) and connect the coil on the harness ... and the 87 on the Light who needed power ... well no needed cap .. or nothing else !!

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

mcculloch hid’s, 04 dodge ram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.