the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

96 maxima grounded output on fac sec sy


Post ReplyPost New Topic
< Prev Topic Next Topic >
bradleonard 
Copper - Posts: 94
Copper spacespace
Joined: August 12, 2002
Location: United States
Posted: August 29, 2007 at 1:06 AM / IP Logged  
I have a 96 Nissan Maxima with the factory security system. Where can I easily find a (-) ground output when the doors are locked? Somewhere in the drivers side dash or center console area would be great.
Thank You
werd
bradleonard 
Copper - Posts: 94
Copper spacespace
Joined: August 12, 2002
Location: United States
Posted: November 07, 2007 at 1:47 AM / IP Logged  
No one has any info this? I have the full Nissan Electrical service manual but I cannot figure out where this may occur. I need this grounded output so that I can hook up a VARAD scanner to indicate when the doors are locked.
werd
techman93 
Silver - Posts: 591
Silver spacespace
Joined: October 28, 2006
Location: Pennsylvania, United States
Posted: November 07, 2007 at 6:43 AM / IP Logged  
You may need to use relays to change a pulse into a constant.
Door Lock      Light GREEN/ Red(-)        Driver's Door 96 maxima grounded output on fac sec sy -- posted image.
Once activated by the relay on the left, the relay's coil on the right will stay energized until either ground or 12v(+) is removed. You can do this with another relay. Or try connecting to a 12v(+) switched source instead of a constant one. Or you can have a door trigger activate a relay to break continuity. The variations are practically endless.
You can also set the scanner to go on when ignition is off.
bradleonard 
Copper - Posts: 94
Copper spacespace
Joined: August 12, 2002
Location: United States
Posted: December 03, 2007 at 1:47 AM / IP Logged  
So there isn't anything that would be grounded at rest? I would prefer to not use relays if I can help it. My truck is full of relays and everytime I have to work on my truck I have figure out what ten different relays do. IT would be cool if I could find a circuit that is ground at rest or grounded when the doors are locked. I used to run the scanner on my old car when the ignition was off, but I really want the scanner to tell me that the doors are locked when its active.
werd
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: December 23, 2007 at 12:24 AM / IP Logged  
I would get inside the door at the latch assembly. (a place to start)
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 25, 2007 at 9:24 AM / IP Logged  
grab the ground for the LED from factory. that should be grounded when armed.
bradleonard 
Copper - Posts: 94
Copper spacespace
Joined: August 12, 2002
Location: United States
Posted: December 30, 2007 at 1:40 PM / IP Logged  
Ted
Interesting suggestion. I checked the factory Security LED. The LED receives a constant +12v and then receives a GROUND from the Body Control Module. The BCM switches that ground to provide blinking or solid or off depending on the state of the security system. So I guess you could convert the "pulse" Ground with some relays but I'd still rather not use relays if I can help it.
Any other suggestions?
werd

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, April 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer