the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 grand caravan, dei 561r


Post ReplyPost New Topic
< Prev Topic Next Topic >
dl. 
Member - Posts: 5
Member spacespace
Joined: November 18, 2006
Location: United States
Posted: September 08, 2007 at 1:52 PM / IP Logged  
 I installed a Dei 561r about 8 months ago. The owner says that if you allow the vehicle to sit for any length of time, (ie overnight) it will not start with the key. If she remote starts and drives it for awhile, it will then start with the key. I haven't had the van long enough to get it to not start yet. All connections are very secure, and I have gone over them 5 times. Any help is much appreciated!
dl. 
Member - Posts: 5
Member spacespace
Joined: November 18, 2006
Location: United States
Posted: September 08, 2007 at 2:52 PM / IP Logged  

I figured out that with my second starter wire (PURPLE / brown)  Which is triggered thru a 180 ohm resistor   if I disconnect this wire the van will start with the key. I checked the impedance of said resistor, it was 197 ohm, so I tried one that tests 182 ohm, it still does the same thing. I am questioning if I had this wired up correctly from the start?     I have #30 off the relay as my out going thru the resistor to the 2nd starter wire(PURPLE / brown) I have 85&87 to ground, and 86 to the 561r main start out. not dioded. is this correct?

Thanks  

dl. 
Member - Posts: 5
Member spacespace
Joined: November 18, 2006
Location: United States
Posted: September 08, 2007 at 2:55 PM / IP Logged  
 Does anyone have a copy of Directfax 1083?
enice 
Silver - Posts: 857
Silver spacespace
Joined: March 05, 2006
Location: New York, United States
Posted: September 08, 2007 at 3:15 PM / IP Logged  
P.M. me with your e-mail address and i'll send you a PDF file of it.
dl. 
Member - Posts: 5
Member spacespace
Joined: November 18, 2006
Location: United States
Posted: September 09, 2007 at 5:19 PM / IP Logged  
 Thanks, I figured it out. I had the second starter relay triggering off the first starter wire. The problem with that is it was triggering when key starting too...Duh!! I am better than that, I don't know what I was thinking.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, May 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer