w7 mounting

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / w7 mounting (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

thakidp

Member - Posts: 11

Joined: May 12, 2007

Location: United States

Posted: September 11, 2007 at 12:46 AM / IP Logged

this may seem like a dumb question but i just got a w7 and i heard somethin about peeling back the rubber lip to drill it down but i dont really see how could someone help me out please??

thakidp

Back to Top

tubbs04

Copper - Posts: 212

Joined: March 31, 2007

Location: United States

Posted: September 11, 2007 at 9:28 AM / IP Logged

On a W7 before you install that trim ring that fits over the surround, you should be able to push the surround towards the inside and that will expose your holes to drill it down...

...don't crush the weasel...

Back to Top

thakidp

Member - Posts: 11

Joined: May 12, 2007

Location: United States

Posted: September 11, 2007 at 9:35 AM / IP Logged

what trim ring? i just got it off ebay so maybe i dont have it thats why im not sure what u mean

thakidp

Back to Top

pss5075104

Copper - Posts: 144

Joined: February 09, 2005

Location: United States

Posted: September 11, 2007 at 9:38 AM / IP Logged

a polished silver ring on the outside.

D

MECP First Class Certified Installer.

Nothing is impossable, it's just more expensive.

Back to Top

thakidp

Member - Posts: 11

Joined: May 12, 2007

Location: United States

Posted: September 11, 2007 at 9:43 AM / IP Logged

okay i just got the trim ring off but the holes are still covered what do i do next?

thakidp

Back to Top

jvillefinest

Copper - Posts: 255

Joined: December 29, 2003

Location: Florida, United States

Posted: September 11, 2007 at 3:36 PM / IP Logged

http://mobile.jlaudio.com/pdfs/W7_MountingSystem.pdf

try reading thier website...

2007 Acura TSX

SQ setup in the works

Back to Top

tubbs04

Copper - Posts: 212

Joined: March 31, 2007

Location: United States

Posted: September 11, 2007 at 5:16 PM / IP Logged

take your finger and push the surround towards the center of the cone... that will expose the holes.....

...don't crush the weasel...

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

w7 mounting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.