Glow Plug wire

Home / the12volt's Install Bay / Car Security and Convenience / Glow Plug wire (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Mbs Audio

Member - Posts: 4

Joined: October 06, 2002

Location: Canada

Posted: February 18, 2003 at 6:15 PM / IP Logged

Need to know where to find the glow plug wire in a 1994 GMC fullsize pick-up with the diesel engine. I don't want to take the dash apart to get directly at the light.

Back to Top

camino

Copper - Posts: 54

Joined: October 15, 2002

Location: Mexico

Posted: February 25, 2003 at 9:32 PM / IP Logged

if you dont want to do that,install a timer relay to send ground to the glow input of the remote star. adjusted it like a 3 seconds more than the ligth stays on,that way the remote start will wait untill the timer relay send the signal to do the remote start.if you have a more quiestions about this let me know.

Back to Top

Haku

Copper - Posts: 204

Joined: November 22, 2002

Location: United States

Posted: February 25, 2003 at 10:18 PM / IP Logged

The dash in that truck is alot easier to take apart then to have problems starting the truck. Not including the extra cost of a timer (if not built in). Its much more reliable, and as stated before in the forum, it is heck on your battery to have both the glow plugs on and starting the vehicle.

Hak

Siemens Autostart

Back to Top

camino

Copper - Posts: 54

Joined: October 15, 2002

Location: Mexico

Posted: February 26, 2003 at 4:41 PM / IP Logged

either way i just say how he can do it,because he dont want to remove the dash.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Glow Plug wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.