the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

04 f250 r.a.p


Post ReplyPost New Topic
< Prev Topic Next Topic >
410440 
Copper - Posts: 82
Copper spacespace
Joined: January 10, 2007
Location: Canada
Posted: September 17, 2007 at 7:23 PM / IP Logged  

Customer has a 2004 F250, he remote starts the truck and if the starter times out and shuts off or he shuts the truck off his radio will stay on and play, i know there is a way to trigger the rap shutdown but i cant remember what it was?

Pulse the doorpin?

do you need a relay or will the (-) Rearm work and just send it to the doorpins?

Matthew Robertson
Senior Installer
Best Buy Deerfoot Meadows
Calgary, AB, Canada
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: September 17, 2007 at 9:04 PM / IP Logged  
you can use either or couple of diodes or a relay.
1)interrupt the door pin wire w/ the door trigger input(from alarm) one side going toward the door and the other side of the relay has the rearm wire attached.
2)blocking diode is prolly an easier choice. the point of using diode is to prevent the rearm feed from goin to the door trigger input wire, potentially setting off the alarm.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
wrenches 
Member - Posts: 44
Member spacespace
Joined: October 22, 2006
Location: Ontario, Canada
Posted: September 17, 2007 at 9:04 PM / IP Logged  
Yes, that should work out fine.  Just puse a doorpin with the rearm wire.
KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: September 17, 2007 at 11:53 PM / IP Logged  

Depending on what type of unit is installed (post it on the next go around) there might be an output that is called "pulse after shut down" this would be used to pulse the drivers door pin wire.

This would be used, or could be used, instead of the rearm, IN CASE you need to actually rearm some factory security. Does this make sence? That way the radio is just shut off after the runtime, if nothing needed to be

"armed"   Does is still make sence?   if not..... never mind.04 f250 r.a.p -- posted image.

410440 
Copper - Posts: 82
Copper spacespace
Joined: January 10, 2007
Location: Canada
Posted: September 18, 2007 at 10:59 AM / IP Logged  
Its a command start cs595i starter / alarm combo
Matthew Robertson
Senior Installer
Best Buy Deerfoot Meadows
Calgary, AB, Canada

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer