dome light delay

Home / the12volt's Install Bay / Car Security and Convenience / dome light delay (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

vger7

Member - Posts: 9

Joined: December 13, 2006

Location: United States

Posted: September 19, 2007 at 2:54 PM / IP Logged

i've installed a remote starter, keyless entry, alarm in a 96 blazer s10 suv. the unit installed is a valiant 4500. whenever the unlock button is pushed, the vehicle unlocks and the dome and other interior lights come on and stay on for about 30 seconds. they also come on when the door handle is pulled. a warning buzzer or chime also comes on and stays on until the interior lights go out. i don't know if this come from the factory like this or if it was wired like this from a previous alarm installation. I bought the blazer used, and it had a "codealarm" alarm installed in it. can anybody tell me how to disable the buzzer/chime or disconnect it?

thanks in advance for any help in this matter,

cornell

kola7126

Copper - Posts: 93

Joined: September 13, 2007

Location: Russian Federation

Posted: September 24, 2007 at 9:31 AM / IP Logged

It`s factory options. Visit dealers.

vger7

Member - Posts: 9

Joined: December 13, 2006

Location: United States

Posted: September 24, 2007 at 10:40 AM / IP Logged

Thanks Kola7126.

sarcomax

Copper - Posts: 276

Joined: November 09, 2005

Location: California, United States

Posted: September 25, 2007 at 3:40 PM / IP Logged

it sounds like a domelight supervision feature. I don't have that manual handy and can't search here at work, but it should be something that can be programed on the alarm.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: September 25, 2007 at 5:24 PM / IP Logged

I'm a little confused. Does it have a Code Alarm still in it, or just the Valiant 4500?

Do your parking lights come on and stay on for 30 seconds after you unlock? If so, the reason it is buzzing is because the car sees the door open, and the parking lights on at the same time. To fix the buzzing...either disable the domelight supervision (may require cutting a wire or programming a feature) or disable the parking lights from coming on upon unlock.

vger7

Member - Posts: 9

Joined: December 13, 2006

Location: United States

Posted: September 25, 2007 at 8:23 PM / IP Logged

Thank you much for your assistance sarcomax. I appreciate it.

vger7

Member - Posts: 9

Joined: December 13, 2006

Location: United States

Posted: September 25, 2007 at 8:32 PM / IP Logged

Thank you Jworm for your response. So far as I can tell, I removed all of the code alarm, but it's really hard to tell. Whoever installed it did a very professional job. The wiring that they did looked like it come from the factory. Again, thanks for your help.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dome light delay

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.