drivers unlock priority
Home /
the12volt's Install Bay /
Car Security and Convenience / drivers unlock priority (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: February 19, 2003 at 10:11 AM / IP Logged
Posted: February 19, 2003 at 4:13 PM / IP Logged
It's not very difficult. go to this web page. That should be what you need. You'll use your unlock #1 pulse to unlock the driver's door and your unlock #2 pulse for the rest. Hope this helps.
Mike
Sales/Tech Support - KICKYRIDEoCOM mobile electronics
MECP 1st class-Security Specialist
Mike
Sales/Tech Support - KICKYRIDEoCOM mobile electronics
MECP 1st class-Security SpecialistPosted: February 19, 2003 at 6:33 PM / IP Logged
Thanks for the help. However, I'm not sure where the violet and grey wires go. Also, How do I hook up the wires coming off posts 87a and 30? Thanks again!!
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
