pro start 2300 trigger wire

Home / the12volt's Install Bay / Car Security and Convenience / pro start 2300 trigger wire (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

flashbang

Member - Posts: 29

Joined: October 10, 2002

Location: New York, United States

Posted: September 26, 2007 at 8:16 PM / IP Logged

When I ground the pro-start 2300 trigger wire it starts fine. Now how do I get a negitive pluse from my OEM 2002 Jeep Grand Cherokee key fob Panic button to operate this remote starter?

I tested the wires comming form the remote key module in the passenger door panel with no luck?

Back to Top

i am an idiot

Platinum - Posts: 13,671

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: October 01, 2007 at 7:00 PM / IP Logged

I am not at all familiar with your start module. Or your vehicle for that matter. Can you select 1 2 or 3 pulses to activate it. If so we set them to 3 pulse and press lock 3 times on the keyfob. You may need to use a relay at the actuator motor to get you the ground pulse you need.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pro start 2300 trigger wire

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.