display illumination

Home / the12volt's Install Bay / General Discussion / display illumination (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

empire69

Member - Posts: 5

Joined: May 25, 2002

Location: Canada

Posted: May 27, 2002 at 8:02 PM / IP Logged

hi i own a very ancient alpine cd head. i have one problem with it. the display works but is not backlit. is there a seperate connection for this. i can see the display if i shine a light on it but otherwise can. it has been in and out of a few cars and looks to be missing a few connections. i read somewhere that a orange and white wire is for illumination. i dont have on of those, and if i did its gone. could it be anything else. please help. thanks

install_tech

Member - Posts: 37

Joined: March 09, 2002

Location: United States

Posted: May 28, 2002 at 12:20 AM / IP Logged

It sounds like the Illumination bulbs are blown. You can order replacement bulbs here: https://www.pacparts.com/scripts/SelManuf.cfm?id=GUEST&name=GUEST&Cfid=185463&CFTOKEN=40490863

*Note- these bulbs are small and usually have to be soldered to the circuit board.

Hope this helps

install_tech

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

display illumination

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.