neon lights during remote start

Home / the12volt's Install Bay / Car Security and Convenience / neon lights during remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bobs94

Member - Posts: 23

Joined: January 01, 2003

Location: United States

Posted: February 21, 2003 at 11:17 AM / IP Logged

I have a Viper 550 ESP alarm/remote start. I want to wire it so that my undercar lights turn on during the remote start process, but turns off when the key is in the ignition. I have an idea of how to do this, but I am not sure if it will work. I think I want to use the blue H3/1 status output wire from my alarm. Thank you for any help.

Back to Top

floaterr

Silver - Posts: 383

Joined: December 07, 2002

Location: United States

Posted: February 21, 2003 at 4:40 PM / IP Logged

Yes use H3/1

Connect on relay as follows

Both 85 and 30 to neons power source positive

86 to the H3/1 wire

87 to the postive feed to the neon

Good luck

Back to Top

camino

Copper - Posts: 54

Joined: October 15, 2002

Location: Mexico

Posted: February 25, 2003 at 7:55 PM / IP Logged

that's a good idea,how about if you do this:

#85 to parking light's output from alarm (+)

#86 to the blue wire that is negative during remote start

#30 to 12 volt constant

#87 output 12v to your neon light's

this way the neon ligths will do the same ligth the parking ligths,flash.of course if you would like it to flash.

Back to Top

ViperATC5

Copper - Posts: 202

Joined: January 17, 2003

Posted: February 25, 2003 at 10:17 PM / IP Logged

you can also program parking light output to remain constant throughout remote start

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

neon lights during remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.