2005 f350

Home / the12volt's Install Bay / General Discussion / 2005 f350 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

diesel32

Member - Posts: 7

Joined: November 13, 2007

Location: Ontario, Canada

Posted: November 13, 2007 at 8:30 AM / IP Logged

Wondering if anyone knows why the door window and lock switches stay illuminated when the vehicle is off and the key is removed?

Also, why is the seat wiring harness different between the driver and passenger seats when the seats are the same. Passenger plugs into the harness but the driver has a differnet connection between the seat and the harness.

Thanks

Steve C

sarcomax

Copper - Posts: 276

Joined: November 09, 2005

Location: California, United States

Posted: November 14, 2007 at 4:43 PM / IP Logged

No idea for question one.

Possible airbag sensor in the passenger seat for question 2.

What are you trying to do?

diesel32

Member - Posts: 7

Joined: November 13, 2007

Location: Ontario, Canada

Posted: November 15, 2007 at 7:02 AM / IP Logged

Replacing the front seats in the truck, bought power heated seats but the truck did not come with heated seats i found out yesterday, thus the wiring connection difference.

Still having the window switch illumination problem, drawing on battery.

Steve C

djdowdell

Copper - Posts: 60

Joined: December 07, 2005

Location: Kentucky, United States

Posted: November 18, 2007 at 1:11 AM / IP Logged

Im not sure if this will help but it may point u in the right direction. I had a 89 Taurus SHO that would light up the key pad when the door handle was pulled, so maybe your truck works the same and has a faulty switch or contact on the handle?

Pure Noize

boogeyman

Silver - Posts: 359

Joined: October 18, 2007

Location: Tennessee, United States

Posted: November 18, 2007 at 6:13 PM / IP Logged

probably an option for heated seats

boogeyman

Silver - Posts: 359

Joined: October 18, 2007

Location: Tennessee, United States

Posted: November 23, 2007 at 12:25 PM / IP Logged

question 1....so you can see the switches when you are ready to unlock when you get out of vehicle

diesel32

Member - Posts: 7

Joined: November 13, 2007

Location: Ontario, Canada

Posted: November 23, 2007 at 12:33 PM / IP Logged

Door switches stay lite continously.

Steve C

boogeyman

Silver - Posts: 359

Joined: October 18, 2007

Location: Tennessee, United States

Posted: November 23, 2007 at 1:34 PM / IP Logged

the best people to ask would probably be your local dealership .........if you can get a direct answer

diesel32

Member - Posts: 7

Joined: November 13, 2007

Location: Ontario, Canada

Posted: November 30, 2007 at 1:16 PM / IP Logged

The radio also stays on after the truck is shut off, have to manually shut down radio, could this be a possible ignition problem not cutting power to accesories?

Steve C

techman93

Silver - Posts: 591

Joined: October 28, 2006

Location: Pennsylvania, United States

Posted: November 30, 2007 at 2:55 PM / IP Logged

possible problem in the ignition switch, bad contacts that may stay connected when key is removed.

The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.