the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

programming dei alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
bondo-boy 
Member - Posts: 27
Member spacespace
Joined: November 08, 2007
Location: Pennsylvania, United States
Posted: November 17, 2007 at 6:03 PM / IP Logged  
how do you program setting from default to two-chirp setting,tried to do tach-less and voltage sense but cant seem to get it , any help?
eurobink 
Copper - Posts: 55
Copper spacespace
Joined: September 06, 2007
Location: Florida, United States
Posted: November 17, 2007 at 6:36 PM / IP Logged  

open door, key on/off

hold valet till chirps once, keep holding till chirps twice, keep holding till chirps 3x.

push the valet 3x and hold. then push unlock button on remote.

let go of valet. cycle ignition and you are done.

offroadzj 
Gold - Posts: 2,041
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: November 17, 2007 at 6:38 PM / IP Logged  
are you programming using the button and led, or bitwriter? If you are using hte button, then once you get to the feature that you want to change, press the ch. 2 button on the remote (usually unlock..except for the 3button remotes, it is the aux button)
HTH
Well i was beat to it, but as a note, if you are using voltage sense, you might as well change the crank time to atleast the .8sec timing. I have seen very few cars that will actually start at the default .6 sec.
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
eurobink 
Copper - Posts: 55
Copper spacespace
Joined: September 06, 2007
Location: Florida, United States
Posted: November 17, 2007 at 7:44 PM / IP Logged  

all new cars i have done with .8 over-crank..

i prefer to let the unit try to restart than burn the starter, older vehicles i would definitely do .8

offroadzj 
Gold - Posts: 2,041
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: June 03, 2005
Location: New York, United States
Posted: November 17, 2007 at 7:57 PM / IP Logged  
most newer cars dont need the .8... but I usually use .8 for most late 90s, early 2000's and then have them come back for an increase if needed.
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, October 19, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer