command start not working

Home / the12volt's Install Bay / Car Security and Convenience / command start not working (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bunkass

Member - Posts: 1

Joined: March 12, 2007

Posted: November 26, 2007 at 10:11 AM / IP Logged

Hello all,

I have a Commany start installed on my 5 spd/99 prelude and it suddently stopped working.

The remote can still be used to open doors, but when I goto active the starter(hold down 1 and leave car running) right before I get out of the car, it does not activate. I've tried unplugging the head unit and letting it restart, but no luck. I noticed when i press the hoodpin the parking lights don't blink like they normally do.

Any thoughts???

Thanks for the help

peterubers

Silver - Posts: 706

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 29, 2006

Location: United States

Posted: November 26, 2007 at 10:15 AM / IP Logged

does the hoodpin look corroded? It won't start if the hood pin is grounded...

The search function is your friend.

peterubers

Silver - Posts: 706

Joined: December 29, 2006

Location: United States

Posted: November 26, 2007 at 10:15 AM / IP Logged

you can try disconnecting the hood pin wire, then remote starting it and see if that works

The search function is your friend.

muaiad97

Copper - Posts: 207

Joined: April 08, 2003

Location: Canada

Posted: November 29, 2007 at 9:09 PM / IP Logged

check the wire for the handbrake or one of the fuse for the power blowen chek it

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

command start not working

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.