the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 s10 remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
gmoneygardner 
Member - Posts: 13
Member spacespace
Joined: November 30, 2004
Location: United States
Posted: November 30, 2007 at 8:33 PM / IP Logged  
im am putting a remote start in my 2001 S10 and everything is hooked up the alarm for the Python 990 works fine but when i remote start it from the key pay the car will get power to everything it just will not crank or turn over, i tested the starter wire with a meter and it reads when started with a key but not with the remote start button. Does anyone know what could be wrong?
Steve Gardner
S&I Manager
Circuit City
dre187 
Copper - Posts: 129
Copper spacespace
Joined: November 24, 2006
Location: Canada
Posted: November 30, 2007 at 8:39 PM / IP Logged  

did you connect starter kill and maybe have the heavy guage green and purple wires reversed?

gmoneygardner 
Member - Posts: 13
Member spacespace
Joined: November 30, 2004
Location: United States
Posted: November 30, 2007 at 8:47 PM / IP Logged  

No i double checked the purple and green and they are correct just now power to the starter wire when activated on the keypad

Steve Gardner
S&I Manager
Circuit City
rudydapimp 
Copper - Posts: 390
Copper spacespace
Joined: February 27, 2006
Location: United States
Posted: November 30, 2007 at 8:47 PM / IP Logged  
did you install a bypass??? like 555L or similar???
gmoneygardner 
Member - Posts: 13
Member spacespace
Joined: November 30, 2004
Location: United States
Posted: November 30, 2007 at 8:52 PM / IP Logged  
I installed the 555LW yes still when i activate the remote start from the keypad the car has all of the power on liek it is running like it would be on the ON position with the key, just no crank or turn of it?
Steve Gardner
S&I Manager
Circuit City
dre187 
Copper - Posts: 129
Copper spacespace
Joined: November 24, 2006
Location: Canada
Posted: November 30, 2007 at 8:53 PM / IP Logged  
so basically what you are saying is that there is no OUTPUT on the purple starter wire when remote started, although there is 12v on the wire during crank with the key, correct? Try using a test light and pulsing the purple wire in the ribbon harness. this will activate the +12v output from the purple wire. make sure BOTH red wires and the RED / WHITE wire are connected and the fuses are good as well
gmoneygardner 
Member - Posts: 13
Member spacespace
Joined: November 30, 2004
Location: United States
Posted: November 30, 2007 at 8:57 PM / IP Logged  

Alright thanks i will give that a try to see what happens.

Steve Gardner
S&I Manager
Circuit City
gmoneygardner 
Member - Posts: 13
Member spacespace
Joined: November 30, 2004
Location: United States
Posted: November 30, 2007 at 8:59 PM / IP Logged  

What should the purple wire meter when tested? 12v?

Steve Gardner
S&I Manager
Circuit City
dre187 
Copper - Posts: 129
Copper spacespace
Joined: November 24, 2006
Location: Canada
Posted: November 30, 2007 at 9:07 PM / IP Logged  
when you pulse the small purple wire in the ribbon harness to ground, the heavy guage purple starter wire will read +12v
gmoneygardner 
Member - Posts: 13
Member spacespace
Joined: November 30, 2004
Location: United States
Posted: November 30, 2007 at 9:15 PM / IP Logged  
thanks i believe that could be the problem i know i have the blue status output hooked up but i dont think that i have the purple (-)200mA starter output connected, so when connecting that wire where do i connect it to?
Steve Gardner
S&I Manager
Circuit City
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, June 16, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer