the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

engine shuts off when alarm is disarmed


Post ReplyPost New Topic
< Prev Topic Next Topic >
yfz4fitty 
Member - Posts: 8
Member spacespace
Joined: December 02, 2007
Location: Minnesota, United States
Posted: December 02, 2007 at 1:34 AM / IP Logged  
I just installed a firesun/prostar gold 2-way alarm/remote start in my 99 dodge ram. When I start my truck with the remote start then disarm my alarm it shuts off the engine, I cannot remote start the truck without the alarm being armed either.. I don't know if this is normal for this alarm/remote start or not, but my last setup was a 791xv in a 98 cadillac sts and I could remote start it, disarm the alarm and it would stay running... Any help would be greatly appreciated. engine shuts off when alarm is disarmed -- posted image.
yfz4fitty 
Member - Posts: 8
Member spacespace
Joined: December 02, 2007
Location: Minnesota, United States
Posted: December 07, 2007 at 6:40 PM / IP Logged  
Anyone have any Ideas???
peterubers 
Silver - Posts: 706
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 29, 2006
Location: United States
Posted: December 07, 2007 at 7:16 PM / IP Logged  

This is not normal for a traditional r/s-alarm unit...

1) who installed it? Can you take it back?

2) If all wiring is installed correctly (i.e. no relays are tripping/interrupting ignition wiring via the arm/disarm), then the brain seems to be either 1) incorrectly programmed, or 2) defective

I've never worked with the above type of remote starter

The search function is your friend.
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 07, 2007 at 7:46 PM / IP Logged  
sounds as if u had the ignition killed wired wrong. did u wire it so when disarmed there would be continuity? becasue some units have ground out when armed, some other units have ground out when armed (constant) and its not like ground when running.
yfz4fitty 
Member - Posts: 8
Member spacespace
Joined: December 02, 2007
Location: Minnesota, United States
Posted: December 07, 2007 at 7:57 PM / IP Logged  
Thanks for the replies.. I installed it myself but I have done several alarms and remote starts, so this kinda boggles me.. The thought of the Starter kill Relay being wired incorrectly Has me thinking.. I know it does work, I have tried starting the Truck when it is armed and it does kill the starter, And the truck starts perfectly fine when disarmed.. I'll try unhooking the starter kill relay and see if it works properly then...
yfz4fitty 
Member - Posts: 8
Member spacespace
Joined: December 02, 2007
Location: Minnesota, United States
Posted: December 07, 2007 at 8:18 PM / IP Logged  
I thought about it for a second and the only relay I have in the system is for the starter disable which only controls the starter wire so that shouldn't have any affect on my problem.. I'm wondering if it has something to do with the acc. (key input wire) wire possibly.. here's a link to the install manual for my alarm.. FireSun Alarm/Remote Start Install   And It's installed in a 1999 Dodge Ram Sport..
peterubers 
Silver - Posts: 706
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 29, 2006
Location: United States
Posted: December 07, 2007 at 9:33 PM / IP Logged  
i read through the manual... nothing i read applies to your problem... i think you may have a defective brain -- disarming should have NOTHING to do with the remote starting feature
The search function is your friend.
yfz4fitty 
Member - Posts: 8
Member spacespace
Joined: December 02, 2007
Location: Minnesota, United States
Posted: December 07, 2007 at 9:46 PM / IP Logged  
Ok Thanks a lot I'm gonna contact the company I bought it from and see if they will Exchange it...
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: December 08, 2007 at 8:06 AM / IP Logged  
yea i looked at the manual still. nothing thatshould be causing that problem.
yfz4fitty 
Member - Posts: 8
Member spacespace
Joined: December 02, 2007
Location: Minnesota, United States
Posted: December 08, 2007 at 7:02 PM / IP Logged  
Well I bought it off Ebay and the user I got it from is no longer a registered user go figure.. So I guess Im stuck with it.. It really ain't no big deal its just gets a lil annoying.. But I'll learn to deal with it...   Thanks everyone for the replies!!! engine shuts off when alarm is disarmed -- posted image.
Page of 2

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer