mecp

Home / the12volt's Install Bay / General Discussion / mecp (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jrod83

Copper - Posts: 81

Joined: October 29, 2007

Location: Texas, United States

Posted: December 02, 2007 at 10:37 PM / IP Logged

So...im about to take the MECP certification test in about a week. I would like to ask you guys if you have any tips or anything to look out for while taking the test. Any help would be appreciated!

MECP Certified

I am the loudest and proudest member of the Fighting Aggies Class of '11 WHOOP!

SAW 'EM OFF!

ritopkid06

Member - Posts: 29

Joined: August 25, 2006

Location: United States

Posted: December 03, 2007 at 9:18 PM / IP Logged

read ALL the answers before picking one even if you think you've come across the right answer before reading them all. Sometimes there are more than one correct answer and you need to pick the BEST answer.

Good Luck

jrod83

Copper - Posts: 81

Joined: October 29, 2007

Location: Texas, United States

Posted: December 03, 2007 at 10:03 PM / IP Logged

thanks man!

MECP Certified

I am the loudest and proudest member of the Fighting Aggies Class of '11 WHOOP!

SAW 'EM OFF!

ibasspro

Copper - Posts: 95

Joined: October 10, 2007

Location: California, United States

Posted: December 04, 2007 at 11:49 AM / IP Logged

If it is a computer based testing station, you can mark the questions you are not 100% on, then come back to them after you have answered all the questions. This is good to do, as while taking the test, your brain will start working better, & you may make a better "GUESS" at the ones you don't know at the end. Also, some questions are asked in different ways, & actually give the answer to other questions.

What I do, & I know they say it is wrong. But I get there early, & read some easy questions out of the study guide, just to get me thinking, & focused on the test....not the crapy directions & had to the place, or how the other driver pizzed me off ;)

used to be loud, used to be fast...now I am married LOL

mobile1

Silver - Posts: 479

Joined: February 23, 2004

Location: United States

Posted: December 04, 2007 at 11:55 PM / IP Logged

Which test are you taking? basic advanced or master?

jrod83

Copper - Posts: 81

Joined: October 29, 2007

Location: Texas, United States

Posted: December 05, 2007 at 1:35 AM / IP Logged

Basic installer. im only 19 but i've been into car audio since i was about 14. My first summer job was at a local custom shop running wires, wiring harnesses etc. I was 16 at the time, i just really got into the whole 12 volt thing and here I am....haha...

MECP Certified

I am the loudest and proudest member of the Fighting Aggies Class of '11 WHOOP!

SAW 'EM OFF!

mobile1

Silver - Posts: 479

Joined: February 23, 2004

Location: United States

Posted: December 05, 2007 at 9:33 AM / IP Logged

focus on the basics when studying. Know how relays work, know what tools are used, know shop safety, and you should be ok.

h34d5h07

Member - Posts: 1

Joined: December 07, 2007

Location: Michigan, United States

Posted: December 07, 2007 at 10:32 AM / IP Logged

I just took my Basic Installer exam a few weeks ago. It's a pretty simple test. The main thing is, when taking the exam, READ the questions, some of the questions are asked a little on the tricky side. Just make sure to study. Flip through the book 3 or 4 times. You should be alright.

jrod83

Copper - Posts: 81

Joined: October 29, 2007

Location: Texas, United States

Posted: December 07, 2007 at 3:38 PM / IP Logged

thanks for all the help guys!...i really appreciate it!!!!

MECP Certified

I am the loudest and proudest member of the Fighting Aggies Class of '11 WHOOP!

SAW 'EM OFF!

zerepdivad

Silver - Posts: 605

This member has made a donation to the12volt.com. Click here for more info.

Joined: July 03, 2006

Location: Wisconsin, United States

Posted: January 07, 2008 at 9:19 AM / IP Logged

So how'd it go?

A DMM is a beautiful thing.

MECP Advanced Installer Certified.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.