1990 Camry Power Windows

Home / the12volt's Install Bay / General Discussion / 1990 Camry Power Windows (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

90camry

Member - Posts: 1

Joined: August 12, 2002

Location: United States

Posted: August 12, 2002 at 7:33 PM / IP Logged

Hey everyone-

I hope there is someone out there that can help me ...

I recently purchased a 1990 Camry - unfortunately the power windows on the drivers side are not functioning. The only window that was functioning when I purchased the car was the right rear (only from the switch on that door - not via the master switch) I did some troubleshooting and decided to remove the master switch, open it and clean all of the contacts ... I replaced the cleaned master switch and the front right window is now also working - but again, only from the switch on that door not from the master switch ... Any ideas on how to get the remaining two windows to function!? I would be very grateful to anyone who could offer any suggestions - it's hot in Boston in August (The car needs an R12 shot too!)

THANKS!!!

Eric

eric.klein5@verizon.net

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 12, 2002 at 7:46 PM / IP Logged

Clean the other contact on the other windows aswell. If this does not work.... your PWC module may be damaged and needs replacing. If you have a DMM you can test wether or not there is power going to the wires from the master switch.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1990 Camry Power Windows

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.