the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Relay to control blower speed


Post ReplyPost New Topic
< Prev Topic Next Topic >
merplastic 
Member - Posts: 2
Member spacespace
Joined: November 25, 2003
Location: United States
Posted: October 14, 2004 at 8:13 PM / IP Logged  
I'm trying to design a circuit to control my blower speed manually for my HVAC system in an 91 vette.  I bought a relay and a rheostat but,  not  now I'm totally confused and dont really have a clue what to do next. I would appreciate any help in this matter.
flynntech 
Copper - Posts: 275
Copper spacespace
Joined: April 15, 2004
Location: United States
Posted: October 14, 2004 at 9:29 PM / IP Logged  

Try a multi position switch with the resistor coils from a car in the JY.

in my car the blower swtich grounds the relay in any position other than off. Each different position routes the positive side through a different sized coil (resistor) which is inside the blower duct, probably for temp correction reasons...I'm not really sure. Anyways, the relay allows current to the motor, the switch choses different paths for it to take.

merplastic 
Member - Posts: 2
Member spacespace
Joined: November 25, 2003
Location: United States
Posted: October 15, 2004 at 9:22 AM / IP Logged  
thanks flynntech. my JY is only a couple miles away. 

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, July 4, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer