Try to figure this one out!

Home / the12volt's Install Bay / General Discussion / Try to figure this one out! (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dr_d69

Member - Posts: 2

Joined: January 20, 2005

Location: Canada

Posted: January 20, 2005 at 1:02 PM / IP Logged

I have been working on this 2003 mustang gt for the last 2 months, the car was bought from california as a rebuild and shipped to BC Canada for repair.

I am almost done the car and need to install Daytime Driving Lights for federal inspection. The problem is there is no module plug on the car and i really do not want to buy a new harness for the car, so does anyone have any ideas ?

help please

forbidden

Platinum - Posts: 5,353

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: January 20, 2005 at 1:10 PM / IP Logged

Wire the fog lights to the ignition line. They will be on whenever the key is in and turned to on, thus daytime running lights. Should get you passed your VI, chances are it is a box 1 VI that you will have to pass and most shops will not know the difference between a fog light and a daytime running light. My 93 MR2 uses the fog lights as daytime running lights as standard equipment.

Top Secret, I can tell you but then my wife will kill me.

dr_d69

Member - Posts: 2

Joined: January 20, 2005

Location: Canada

Posted: January 20, 2005 at 1:34 PM / IP Logged

no i just talked to the inspection facility and unless the fog lights came as factory driving lights they wont accept that.

and the stock canadian module wont work because the harness is different ( no pigtail plug for the module)

aftermarket driving light kit maybe be best way to go.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Try to figure this one out!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.