Calibra Alarm W/Diagram

Home / the12volt's Install Bay / General Discussion / Calibra Alarm W/Diagram (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

dkeenan

Copper - Posts: 52

Joined: May 20, 2002

Location: Ireland

Posted: May 20, 2002 at 6:08 PM / IP Logged

I am currently having difficulty wiring my car alarm. I have a 94 Vauxhall Calibra. It has a prewired alarm and I am experiencing problems while wiring the keyless entry. CAn anyone please help?

naughtydog

Copper - Posts: 90

Joined: May 02, 2002

Location: United Kingdom

Posted: May 21, 2002 at 12:24 PM / IP Logged

I know the calibra well, you can get most connections at a yellow plug behind the glovebox.

The locking is neg pulse ( BROWN / red and BROWN / white)

+15 = Black

+30 = Red

+50 = RED / Black at ignition switch

Indicators = BLACK/ Green and BLACK/ White - at yellow plug

Doorswitches = BROWN / White - at yellow plug

Boot = BROWN / White - at yellow plug

Fule pump = Blue/Red in N/S Sill loom

Hope ths helps

Naughtydog

PS:- it's from my memory - please test first - I coule be going senile...

dkeenan

Copper - Posts: 52

Joined: May 20, 2002

Location: Ireland

Posted: May 21, 2002 at 3:59 PM / IP Logged

Thanks a million.

I'll try it out.

Cheers

dkeenan

Copper - Posts: 52

Joined: May 20, 2002

Location: Ireland

Posted: May 21, 2002 at 6:25 PM / IP Logged

I purchased my alarm through a friend in Taiwan. It has many feature including the following - passive locking, Panic, Valet mode, shock sensor, Engine override, Anti-hijack, Dome light supervision.

There is no wiring Diagram, just a list of the following wires,

grey - siren

white - ignition

thin red - dome light supervision "-" output

Purple - auxiliary "-" output

pink - indicator

Orange - door (+)

red - +12v

green - pin switch

pink - indicator

blue - door (-)

yellow - armed / disarmed gnd output

black - ground

brown - aux. sensor I/P "-"

BLACK/ white - valet switch I/P ("-")

C.D.L.

green - lock common

orange - unlock common

yellow - lock n.o.

yellow/black - unlock n.o

black - lock n.c

BLACK/ white - unlock n.c

Can someone please help me with the wiring for the central locking.

Also it says there is an immobiliser function.

How is this posible with the wires listed above.

naughtydog

Copper - Posts: 90

Joined: May 02, 2002

Location: United Kingdom

Posted: May 22, 2002 at 5:14 AM / IP Logged

Connect the Green and Orange to Ground

Connect the Yellow to the BROWN / Red on the vehicle

Connect the Unlock wire( you have black and BLACK/ white as both being N.C - this cant be correct ) to the BROWN / White on the car.

You do not appear to have a proper engine-cut circuit???, Maybe they want you to use the yellow - armed / disarmed gnd output to control a relay. Look at the diagram section of this site for information regarding this.

Naughtydog

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Calibra Alarm W/Diagram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.