is it hard to build fiberglass enclosure

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / is it hard to build fiberglass enclosure (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

skylark

Copper - Posts: 191

Joined: August 04, 2003

Location: United States

Posted: January 17, 2004 at 8:56 PM / IP Logged

i have never worked with fiberglass but i have bondo up an car panel even if its my first time how could i do it or do i need PROFESSIONAL HELP

goingcrazyonsound

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: January 17, 2004 at 10:27 PM / IP Logged

I wouldn't call it hard, just time consuming. If you search through this forum there are a couple of "how-to's" here.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

skylark

Copper - Posts: 191

Joined: August 04, 2003

Location: United States

Posted: January 19, 2004 at 12:58 AM / IP Logged

ya i went thru and got every thing i need thanks

goingcrazyonsound

Gumbya4

Member - Posts: 12

Joined: January 15, 2004

Location: United States

Posted: January 19, 2004 at 12:46 PM / IP Logged

skylark wrote:

ya i went thru and got every thing i need thanks

I just did my first box last weekend(that sounds bad) and it was pretty easy(bad there too). Like he said it is very tedious. Just make sure that you mix the resign correctly. I only put half the hardener in. I was able to "fix" it but I am going to start over. Make sure you thoughly think the design out. I thought that I had a good design but I made changes to the second box.

Good luck.

„h "Simplicity is the ultimate sophistication." Leonardo da Vinci (1452-1519)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

is it hard to build fiberglass enclosure

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.