how to attach fg box?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / how to attach fg box? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jboat71

Member - Posts: 23

Joined: November 29, 2003

Location: United States

Posted: March 27, 2004 at 11:10 PM / IP Logged

i am ready to start a fg box in my caprice [thanks for all the info] my question is after you build the fg box how do you make it stay in place

thank you

jboat71

xtreamcc

Silver - Posts: 467

Joined: March 24, 2004

Location: United States

Posted: March 27, 2004 at 11:48 PM / IP Logged

well, usually I make a base out of MDF and carpet it to match the trunk, then I can just bolt this base down to the body. Thats how I'd do it.

"Shiny chrome when used in conjunction with bikini models is particularly effective in inducing brain deficit disorder"

02 Jeep Grand Cherokee

Monster System on its way.

Meisnera

Member - Posts: 4

Joined: March 27, 2004

Posted: March 28, 2004 at 2:00 AM / IP Logged

Hi, if you made your box thick enough you should have no problems bolting it down the same way you would with a MDF box.

defective

Silver - Posts: 642

Joined: August 20, 2003

Location: Canada

Posted: March 28, 2004 at 8:45 AM / IP Logged

i just layer glass till it's too thick and heavy togo anywhere.....grin... not on purpose but thats how it ususally ends up

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: March 28, 2004 at 11:02 AM / IP Logged

Bolt it down.

dream it, build it, fiberglass it

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to attach fg box?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.