Speaker Rings?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Speaker Rings? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

emorse2323

Copper - Posts: 106

Joined: January 01, 2003

Location: United States

Posted: February 16, 2003 at 9:21 PM / IP Logged

When you make speaker rings do you have them out of 3/4 MDF and then use a piece of 1/2 MDF on top of that only bigger to make the speaker flush?? Or how do you guys usually do it?

Thanks

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: February 16, 2003 at 10:19 PM / IP Logged

That sounds about right. You would just make two rings the same size external diamater then cut the mounting ring to the mounting diameter of the sub and the flush ring to the external diameter of the woofer. If you were going to use a grill you would just make the flush ring out of 3/4 mdf.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

audiomechanic

Silver - Posts: 388

Joined: November 09, 2002

Location: United States

Posted: February 17, 2003 at 6:11 AM / IP Logged

to cut those rings out , use a router and a circle jig.

you can use a jigsaw and a compass but most of the time it will come out wavey and need to be sanded.....installguy509

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Speaker Rings?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.