how to wire my l7s?

Home / the12volt's Install Bay / Car Audio / how to wire my l7s? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

tallalex200

Member - Posts: 3

Joined: July 20, 2009

Posted: July 20, 2009 at 9:14 PM / IP Logged

ok so i just bought a kicker zx2500.1 and i have 2 L7s there 15s there 4 ohm so i try connecting the subs to the amp and at a specific volume the amp will start shutting off i just want to know how i could connect this subs to the amp so they could b hitting hard

i am an idiot

Platinum - Posts: 13,709

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: July 20, 2009 at 9:40 PM / IP Logged

How do you have them connected now? Are they dual voice coil drivers? Will your amp operate safely into a 1 Ohm load?

Let's Go Brandon Brown. Congratulations on your first Xfinity Series Win. LGBFJB

tallalex200

Member - Posts: 3

Joined: July 20, 2009

Posted: July 21, 2009 at 5:53 AM / IP Logged

There's 4 coils on each woofer I have them at 4 ohms right now the amp is 2 ohm stable or 4 as well what I was thinking about doing is to drop each woofer to 1 ohm and connect it to the amp would that make it 2 ohms or how can I wire them so the amp won't shut off on me

i_want_the_boom

Copper - Posts: 86

Joined: June 02, 2009

Location: Ohio, United States

Posted: July 21, 2009 at 8:19 AM / IP Logged

that amp should be fine running at 4 ohms. Did you set your gains correctly?

If the trunk dont rattle then its not loud.

If it's to loud then you're to old.

Search for other posts by i_want_the_boom

tallalex200

Member - Posts: 3

Joined: July 20, 2009

Posted: July 21, 2009 at 11:49 AM / IP Logged

The gain is less thN half but for some reason it keeps shuttin off on me

i_want_the_boom

Copper - Posts: 86

Joined: June 02, 2009

Location: Ohio, United States

Posted: July 22, 2009 at 9:23 AM / IP Logged

you said you have them wired to 4 ohms did you use the subwoofer wiring link on this site to see hot to wire them. If you turn the gain all the way down does your amp still cut off? if you only connect one speaker does it still cut off?

If the trunk dont rattle then its not loud.

If it's to loud then you're to old.

i_want_the_boom

Copper - Posts: 86

Joined: June 02, 2009

Location: Ohio, United States

Posted: July 22, 2009 at 9:47 AM / IP Logged

Option 2 (series/parallel) = 4 ohm load

Voice coils wired in series, speakers wired in parallel

Recommended Amplifier: Stable at 4, 2, or 1 ohm mono

they should be wired like this. Read the sticky on how to set your gains. your amp only pushes 1500x1 @ 4ohms

If the trunk dont rattle then its not loud.

If it's to loud then you're to old.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to wire my l7s?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.