the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

speaker basket clearence with door panel?


Post ReplyPost New Topic
< Prev Topic Next Topic >
foc-us2k 
Member - Posts: 3
Member spacespace
Joined: September 07, 2009
Location: Virginia, United States
Posted: September 07, 2009 at 11:23 AM / IP Logged  

Hello all,  I am having a sound issue.  I am working with a 2000 honda civic si coupe.  The doors are dynamated and door seals are in place.  I cut enough material away from the plastic part of the door panel, but nothing from the metal part of the door.   The speakers just fits in the hole that i made. My problem is that I think there is supposed to be more space around the basket part for ventelation.  To me the sounds kind of tinnie and it get distoreted very easy. I have attached pics to show what I mean.  I was wondering if I should cut out more material to give the speaker room?

My setup is, this is for the front stage only:

Boston Z6 ( Running in Bi-amp, Bi-wire)

PPI PCX 4125 (125x4 rms)

Alpine CDA-7998  (preout only)

speaker basket clearence with door panel? -- posted image.speaker basket clearence with door panel? -- posted image.

KarTuneMan 
Platinum - Posts: 7,056
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: December 14, 2004
Location: Isle Of Man
Posted: September 07, 2009 at 9:15 PM / IP Logged  

You have a  couple of choices. Cut the door, or build OUT, away from the door. OR both!

Window clearing the magnet when it's down is the first issue, the second is clearing the door panal.

blackcivichatch 
Copper - Posts: 229
Copper spacespace
Joined: January 27, 2009
Location: Missouri, United States
Posted: September 07, 2009 at 9:23 PM / IP Logged  
First off. I love your car. Haha. The Poor sound quality could be caused be the metal speaker basket making contact with the Metal door panel and causing it to vibrate..
UNLABELED Custom Car Club President
foc-us2k 
Member - Posts: 3
Member spacespace
Joined: September 07, 2009
Location: Virginia, United States
Posted: September 08, 2009 at 9:15 AM / IP Logged  
It all fits ok, I have no clearance issues. I have about 1 inch between the glass and the back of the speaker. The basket gets close but dosent touch the metal part of the door.  maybe and 1/16 of a inch.  my problem/question is that, Does ristricting the air space between the the back of the speaker and the door panel as you can see in the second pic. Will that affect sound quality aka make that tinnie sound.  Should I clearence more of the door panel and metal part of the door away so that the back of the speaker has more room to breathe?
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: September 08, 2009 at 9:19 AM / IP Logged  
"Tinny"? That sounds to me like crossover issues... "Distorted" to me would indicate a mismatched gain setting somewhere.
On your deck, where do these conditions start occuring? Do they start at the same time, i.e. the same place on the volume knob? If not, is the tinny sound throughout the volume range? If so, consider adjusting your high-pass crossoer slope or frequency.
As far as "more space for ventilation", I personally think that's a non-issue in this particular case. The Xmax values you are dealing with in this case are too small to really have an air-flow issue; seeing the area they have already been provided for breathing, I think you're OK.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
foc-us2k 
Member - Posts: 3
Member spacespace
Joined: September 07, 2009
Location: Virginia, United States
Posted: September 08, 2009 at 5:45 PM / IP Logged  
It  happens at diffrent points in the volume depending on what song i am playing.   the headunit is set to flat with all crossovers time corrections set to defeat.  The crossovers on the amp are set to full for the tweeters and the mid are high passed at 70hrz, but I have tried them set to full also.  the rest is all on the boston crossovers.  I cant change the gain for left to right.  All i can change is the gain for the mid set or the tweeter set.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, October 31, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer