the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Car Speaker Install in 98 Grand Prix


Post ReplyPost New Topic
< Prev Topic Next Topic >
Ramboxxx187 
Member - Posts: 2
Member spacespace
Joined: August 02, 2003
Location: United States
Posted: August 02, 2003 at 11:05 AM / IP Logged  
I need to know how to remove the grills from the back panel in a 1998 Pontiac Grand Prix GT.  These speakers are 6X9's and for some reason can't be lifted up like typical grills.  Thanks in advance for any help.  Scott
esmith69 
Gold - Posts: 1,511
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 26, 2002
Location: United States
Posted: August 02, 2003 at 11:10 AM / IP Logged  

remove rear seat bottom cushion and upper cushions.

2. remove (3) panel fasteners from front edge of rear deck.

3. lift rear deck up in the middle to release side edges from

and remove rear deck.

4. extract (4) screws holding speaker, unplug and remove

speaker.

Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com
Ramboxxx187 
Member - Posts: 2
Member spacespace
Joined: August 02, 2003
Location: United States
Posted: August 02, 2003 at 1:20 PM / IP Logged  

Thanks.  It took me about 1/2 hour to do the job.  

How about the front speakers.  The grills are similar because they are attached to the door panel. 

Any help would be appreciated.

Scott

esmith69 
Gold - Posts: 1,511
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 26, 2002
Location: United States
Posted: August 02, 2003 at 2:03 PM / IP Logged  

Glad to hear you got the back ones out okay.  Here's the info I have for the front doors:

1. EXTRACT (2) COVER CAPS AND (2) T-27 TORX BOLTS FROM THE DOOR

PULL.

2. UNSNAP POWER SWITCH PANEL FROM LOWER REAR EDGE FIRST,

UNPLUG, LIFT AWAY AND REMOVE.

3. PULL DOOR HANDLE AS IF TO OPEN DOOR AND EXTRACT SCREW FROM

THAT CAVITY.

4. UNSNAP MIRROR COVER TRIANGLE AT TOP FRONT EDGE OF DOOR

PANEL.

5. USING A PANEL REMOVAL TOOL PRY OUTWARD AROUND THE EDGES OF

THE DOOR PANEL TO RELEASE POP FASTENERS, LIFT PANEL UP AND

AWAY TO REMOVE.

6. EXTRACT (4) SCREWS HOLDING SPEAKER, UNPLUG AND REMOVE

SPEAKER.

Ethan
-----
"Patience, persistence, and perspiration make an unbeatable combination for success"
Donate to the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, June 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer