Topic Closed)
Members
Search
Register
Login
Posted: July 10, 2002 at 4:59 AM / IP Logged
Installing a cdplayer, bought wiring harness and installed this player. Am using a Metra 70-5511 with amplifier integration plug. Have power to unit and all seems fine, but NO sound from speakers. Reinstalled factory radio/cassette and speakers work. Have tested all wires and they have power. Don't know if this premium sound system or not. (bought used). Do I need an amplifier bypass cable?
Any help to figure this out, would be greatly appreciated. Thanks
Posted: July 10, 2002 at 7:48 AM / IP Logged
Posted: July 10, 2002 at 10:56 AM / IP Logged
Thank you. Dealer gave me wrong power ends. Right connector did the trick. Have a good day and again thank you.
Posted: July 10, 2002 at 12:01 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Monday, September 15, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Monday, September 15, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
