Recommended MTX9500 Setup?

Home / the12volt's Install Bay / Car Audio / Recommended MTX9500 Setup? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

ActiveTuning

Member - Posts: 15

Joined: February 23, 2003

Location: United States

Posted: September 28, 2003 at 12:32 AM / IP Logged

Hey Guys,

Quick question. I get MTX gear at cost, and definitely want to get the new Thunder 9500 Series. Now question, in terms of amp to the sub, would you guys recommend the MTX 1501D? Remember, I want to stick with MTX here, because I know there is better. I heard that I should really consider running 2 1501D amps into the 9500 sub? Is that true? Power rating on that amp is 1,500w peak, 1,000w RMS @ 2ohms, or 500w RMS @ 4ohms. What do you guys think?

Also, I have a crank pulley in my car, will it be able to handle the power output?

One more question, what kind of box would you recommend using for the 9500?

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: September 28, 2003 at 11:49 AM / IP Logged

well it depends on how you are going if you wire your sub in the right configuration your amp will be able to produce max power. If you are running more then one sub you still should consider running one amp with the DVC's on these subs as many DVC's you will be able to match your lowest resistance for the amp using the subs. If you use more then one amp per sub or using one sub one amp configuration your amps will need to match your crossovers exactly! this is not as easy as it sounds trust me. As far as the box the new 9500's are absolutly ungodly in a vented box. I will alwasy recomend vents over ports. I find it easier to make a vent clearer then a port. If you are looking for exact specs I could help you with those or if you are looking for a box to be built in the MO<KS<IA<NB area thats where I am let me know if you need any more help

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Recommended MTX9500 Setup?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.